|
Who's Online
There currently are 6015 guests online.
|
Categories
|
Information
|
Featured Product
|
|
|
|
|
There are currently no product reviews.
;
Very clear scan, I recommend it. Definitely a must have for any 3362 owner.
Alpine could have written a slightly more complete manual, though. It's already pretty huge, but the unit has so many functions, I feel some more explanation would have been better.
Yamaha's manual of their comparable YDSP-1 is a little better in my opinion.
;
Immediate response with excellent service - highly reccommended
;
Correct manual received and of good quality but the contents of the file for the Service Manual for the same monitor is for a 20" TV not the RGB Monitor.
;
The owners manual for the Pioneer VSX-D603S was exactly what I needed. I received it in a timely manor and it was priced fairly. I definately will use your servise again. Thank You
;
This is a great manual. It was easy to read and very accurate. The size of the manual is small so email is no problem. I highly recommend it. The manual is very hard to find other than this website.
Troubleshooting
If there is no sound from any of the speakers: � Make sure the subwoofer is plugged into an active AC wall outlet. � Make sure the Master Power Switch, located on the rear of the subwoofer, is in the On/Standby position. � Make sure there is a source � for example, a DVD Player, CD Player, VCR or television � hooked up to one of the four input jacks. � Make sure that the program material is playing. � Recheck the hookup connections, referring to the Speaker Connections section. If there is no sound from the surround speakers or sound is very low: � Check all connections between processor/amplifier and each of the speakers. � Raise the surround volume from the remote control (see Operation section). � Make sure the TV show or movie you are watching is recorded in Dolby Digital or Pro Logic Surround. If it is not, try the Phantom or Simulated Surround mode. � Increase the surroundspeakers� level, using the level-adjustment instructions found earlier in this manual. If there is no sound from the center speaker: � Make sure that the processor is in the Surround or 3-Stereo mode. If it is in Phantom or Stereo mode, the center speaker will not play. � Increase the level of the center channel, using the level-adjustment instructions earlier in this manual. � Check the connections between the subwoofer and the center speaker. If you have low bass output: � Experiment with placement of the subwoofer. Remember, place the subwoofer in a corner to get maximum bass output from the system. � Increase the subwoofer level, using the leveladjustment instructions found earlier in this manual. � Increase the level of bass, using the remote control.
-14-
|
|
|
> |
|