Thank you for having the manual I needed for an older model Aiwa stero I had found on Ebay --- I wanted the Aiwa because I had tapes and cd's but I did not have a manual as to how to operate the system... I found what I needed and it has enabled me to set the system up for my enjoyment.
Speedy confirmation to my order , with elaborate instructions .
Item Email , received immediately as desired by me.
A Pleasant & Satisfying Transaction.
Text excerpt from page 3 (click to view)
SPEAKER PLACEMENT
Proper placement of your speakers is an important step in obtaining the most realistic soundstage possible. These recommendations are for the optimum placement of your loudspeakers. Use these placement recommendations as a guide. Slight variations will not diminish your listening pleasure. The Studio Series S-CENTERII loudspeaker is videoshielded and can safely be placed near a television.
0-2 ft.
The S-CENTERII is designed to complement all of the Studio Series loudspeakers. It is the ideal way to re-create the cinematic experience in your home. The supplied self-adhesive felt pads may be attached to the bottom corners of your S-CENTERII speaker to protect your television or furniture.
SPEAKER CONNECTIONS
CONNECTION TIPS
Speakers and electronics terminals have corresponding (+) and (�) terminals. It is important to connect both speakers identically: (+) on the speaker to (+) on the amplifier and (�) on the speaker to (�) on the amplifier. Wiring �out of phase� results in thin sound, weak bass and a poor stereo image. With the advent of multichannel surround sound systems, connecting all of the speakers in your system with the correct polarity remains equally important in order to preserve the proper ambience and directionality of the program material. To use the binding-post speaker terminals, unscrew the collar until the passthrough hole in the center post is visible under the collar. Insert the bare end of the wire through this hole; then screw the collar down until the connection is tight. The hole in the center of each collar is intended for use with banana-type connectors.